ROEDERS RXP500DS five-axis vertical machining center has a machine tool travel of 425 mm × 400 mm × 240 mm,
a worktable size of Ø 250 mm, an A-axis swing angle of +/- 110°,
a C-axis rotation range of +/- n×360°,
a maximum worktable load of 60 kg,
and a feed speed of 40,000 mm/min for each axis.
Machine travel: 200mm x 294mm x 200mm
Workbench size: 370 mm × 350 mm, T-shaped groove width of 12mm, spacing of 50mm
Maximum workpiece height: 300 mm, total length of tool and head is 90mm
Maximum weight capacity of workbench: 200 kg
Feed rate: up to 42000 mm/min per axis
Spindle speed: 50000rpm, HSK E25 specification, maximum tool diameter 6mm
The standard configuration of the knife magazine is a 12 bit knife magazine;
Equipped with a laser cutting tool measurement system;
Can automatically detect and compensate for tool length and diameter,
Measure the contour of the cutting tool
Waste disposal
Simple bottom waste disposal device
The weight of the machine tool is about 3.2t
Machine tool dimensions: W 2425 mm x L 1925 mm x H 2070 mm
